Skip to main content

This Week in Fluvio #1

· 8 min read

Welcome to the very first edition of This Week in Fluvio, our weekly newsletter for development updates to [Fluvio open source]. Fluvio is a distributed, programmable streaming platform written in Rust.

New Release - Fluvio v0.9.0​

Today we're releasing a new "major version" of Fluvio, which includes crate-level and protocol-level breaking changes from the 0.8.x line of releases. Note that although Fluvio is still pre-1.0, we do our best to stick to semantic versioning, treating the second digit as our major version. Let's dive in and see what new features and breaking changes we have to talk about.

New target support and the Tier system​

We've been putting in a lot of work to support new build targets so that users can run the Fluvio CLI on more platforms and architectures. We have also introduced a Tier system that describes which targets must be able to build and pass tests. Here is a breakdown of our current Tiers, what they mean, and which executables belong to those tiers:

Tier 1​

Tier 1 targets are those that must compile and pass tests. We have configured our CI to reject any changes that cause any of these targets to stop compiling successfully or to stop passing tests. The following executable/target combinations are currently considered Tier 1:

  • Fluvio CLI (fluvio)

    • x86_64-unknown-linux-musl (Linux x86 64-bit)

  • Fluvio cluster (fluvio-run)

    • x86_64-unknown-linux-musl (Linux x86 64-bit)

Tier 2​

Tier 2 targets are those that must compile, but for which we don't yet run tests or block progress on those tests passing.

  • Fluvio CLI (fluvio)
    • aarch64-unknown-linux-musl (Linux ARM 64-bit)
    • x86_64-pc-windows-msvc (Windows x86 64-bit)
    • aarch64-apple-darwin (Apple M1)
    • x86_64-apple-darwin (Apple x86 64-bit)
    • arm-unknown-linux-gnueabihf (Raspberry Pi zero)
    • armv7-unknown-linux-gnueabihf (Raspberry Pi)

Better Kubernetes Support​

With 0.9.0, Fluvio now supports any standards compliant Kubernetes distribution. It defaults to standard storage drivers, but can be configured to use different drivers. We have tested with the following Kubernetes distributions:

  • Minikube
  • Kind
  • K3d
  • AWS EKS

Please see Fluvio's [Kubernetes documentation] for more information.

Helm changes​

Fluvio's CLI bundles helm charts for easy installation. Fluvio's charts are no longer published to the Fluvio registry.

Please use following commands to update your Fluvio installation:

fluvio cluster upgrade --sys      # upgrade CRD
fluvio cluster upgrade            # upgrade rest

Error Handling for SmartStreams (#1198)​

One of Fluvio's premiere features is SmartStreams, which allow users to write custom WebAssembly modules to perform server-side data processing. Until recently, there was no way for user code to return Errors to indicate that something had gone wrong while processing records.

Prior to 0.9.0, the only type of SmartStream was filters, which looked something like this:

use fluvio_smartstream::{smartstream, Record};

#[smartstream(filter)]
pub fn filter_odd(record: &Record) -> bool {
    // Parse the input bytes as a UTF-8 string, or return false
    let string_result = std::str::from_utf8(record.value.as_ref());
    let string = match string_result {
        Ok(s) => s,
        _ => return false,
    };

    // Parse the string as an i32, or return false
    let int_result = string.parse::<i32>();
    let int = match int_result {
        Ok(i) => i,
        _ => return false,
    };

    int % 2 == 0
}

Note that this function is required to return a boolean, which indicates whether the Records should be kept in the stream (if true) or discarded (if false). However, there is no way to indicate whether a logic error has occurred during processing.

For example, what happens if the Record data we are given is not valid UTF-8 data? We have no way to report this situation to the consumer, and therefore the best course of action we have is to just return false and discard any records that are invalid. This means that we risk mixing up the logically distinct cases of:

  • "we have valid Records, and successfully discarded some of them", and
  • "we have an invalid Record, so ignore it"

and since we had no way to report this to the consumer, it is very difficult to debug this situation.

Enter SmartStream Error handling​

With the 0.9.0 update, SmartStreams are now written like this!

use fluvio_smartstream::{smartstream, Record, Result};

#[smartstream(filter)]
pub fn filter_odd(record: &Record) -> Result<bool> {
  let string = std::str::from_utf8(record.value.as_ref())?;
  let int = string.parse::<i32>()?;
  Ok(int % 2 == 0)
}

Notice that now, the filter function returns a Result<bool>, meaning that SmartStream authors now have tha ability to return an Err describing any problems that happened when running their code.

The fluvio_smartstream::Result type allows you to return any error type that implements std::error::Error*, which means that you can simply propagate most errors up and out using ?, like we do in the example above.

*and Send + Sync + 'static. We use the [eyre] crate to capture returned errors.

This SmartStream parses incoming records as integers, then filters out odd numbers. When we run a consumer with this SmartStream, we can see the filtered data, and we can see the consumer deliver our error to us if we give an input that can't be parsed as an integer.

SmartStream Maps​

Another big feature that we've had in the works for a while is a new type of SmartStream, #[smartstream(map)], used to transform the data in each record in a stream. This feature has been available in "preview" since 0.8.5, but we did not want to release it until we had error-handling ready for SmartStreams, which happened this release! Let's take a look at what a SmartStream Map function looks like.

use fluvio_smartstream::{smartstream, Record, RecordData, Result};

#[smartstream(map)]
pub fn map(record: &Record) -> Result<(Option<RecordData>, RecordData)> {
  let key = record.key.clone();

  let string = std::str::from_utf8(record.value.as_ref())?;
  let int = string.parse::<i32>()?;
  let value = (int * 2).to_string();

  Ok((key, value.into()))
}

See the [full source code for this example on GitHub]!

In this example, we are reading in Records and first parsing them as UTF-8 strings, then parsing those strings as integers. If either of those steps fails, the error is returned with ? and the consumer receives an error item in the stream.

Notice that the return type for Map is different from we have seen before with Filters. In order to edit the Records in our stream, we manipulate them in our function and then return the transformed output. The successful return value is a tuple of the new Key (optional) and Value for the output record. The RecordData type may be constructed from any type that has impl Into<Vec<u8>>, so you can just use .into() for a lot of types such as String when you want to return them.

When we give valid integers, our output comes back transformed as expected - the integers have been doubled. However, if we give invalid input, the Consumer CLI prints the error that was returned by the user code, along with diagnostic information such as the record's offset.

Internal improvements​

For the full list of updates in this release, [check out our CHANGELOG]. Here are some highlights:

Improved install.sh to work for more targets (#1269)​

Prior to 0.9.0, the one-line install script only worked for MacOS and Linux on x86 architectures. Now, it also works for non-x86 targets such as arm and armv7, which, notably, allows it to work directly on Raspberry Pi.

Updated ConsumerConfig builder API to match standard builder patterns (#1271)​

Our ConsumerConfig type is used when constructing consumers programmatically. Prior to 0.9.0, we used an [owned-builder] pattern (chained by passing mut self), which is less flexible than the [mutable-builder] pattern (chained by passing &mut self) that we have now adopted.

Improved #[derive(fluvio_protocol::{Encoder, Decoder})] for enums (#1232)​

We use the procedural macros fluvio_protocol::{Encoder, Decoder} to derive traits by the same name. These macros used to have a limitation where they did not work on enums that carry data, but now this works as expected.

Conclusion​

That's it for this week, we'll be publishing a newsletter once a week from now on, so stay tuned for more Fluvio updates! If you have any questions or would like to get involved, feel free to join our Discord channel!

Until next week!